46
3.5 Backup officer setting
This section describes how to set the backup officer.
The buzzer, which is set to the backup officer, is activated when the 2nd stage remote audible alarm
is initiated.
3.5.1 Setting backup officer
1） Call the SET VALUE screen in according to the procedure of the section “3.4.1 Call of menu
mode screen”.
2） Select [BACKUP OFFICER], and then press .
3） Select the backup officer.
Since [BACKUP OFFICER] screen is displayed, select the changing officer with , and
then press .
4） Select ON or OFF.
Select ON or OFF with , and then press .
When this setting change is canceled, press .
The officer who is not connected is not displayed.
It is necessary to make at least one person's officer backup.
When selected to ON, the buzzers are set to the continuous sound. When selected to OFF, they
are set to the discontinuous sound.
5） When press , it returns to the countdown screen and start operation with the changed
setting.
To Next Page
Loading...
