43
3.4.5 Changing backup officer name
Backup officer names displayed on the countdown screen can be changed.
1） Call the SET VALUE screen in according to the procedure of the section “3.4.1 Call of menu
mode screen”.
2） Select [OFFICER NAME], and then press .
[OFFICER NAME] screen is displayed.
3） Select an officer name for edit, and the press .
The officer name edit screen is displayed.
4） Select one desirable character with , and then press .
[C] deletes one character, [AC] deletes all characters, [OK] ends this edit, and [EXIT] cancels
this edit.
Also deletes one character.
5） When finished the edit, select [OK], and then press .
Then edited character string is reflected. When edit is canceled, select [EXIT], and then
press .
To Next Page
Loading...
