42
3.4.4 Setting of bridge alarm transfer delay time
When an alarm is received from other navigational equipment, the bridge alarm transfer delay
time is to set a delay time to transfer until the 2nd stage remote audible alarm.
1） Call the SET VALUE screen in according to the procedure of the section “3.4.1 Call of menu
mode screen”.
2） Select [ALARM TIME], and then press .
[ALARM TIME] screen is displayed.
3） Select [BRIDGE] with , and then press .
4） Change the bridge alarm transfer delay time.
Select your required the transfer delay time with , and then press .
When this setting change is canceled, press .
A delay time can be set from 0 s to 30 s.
5） When press , it returns to the countdown screen and start operation with the changed
setting.
To Next Page
Loading...
