JRC JCX-161 - Easy Trouble Shootings

Chapter 4 Maintenance
61
4.3 Easy trouble shootings
In case of troubles, please check the following points before contact to our service staff.
Trouble Cause How to recover Ref.
The LCD on the
operation panel is
not displayed.
The power switch of NCK-175 has
been turned off.
Turn on the power breaker. P14
The display has been dimmed.
Adjust the dimmer.
P57
NYG-5 reset does
not work.
There are air conditioning devices
around NYG-5.
Take apart the air conditioning
devices from NYG-5.
P26
Visual indication
does not work at
NCJ-895/896.
The display has been dimmed. Adjust the dimmer. P22
P30
Visual indication
does not work at
NCD-2257.
The display has been dimmed.
Adjust the dimmer.
P28
Counting down of
dormant period
does not start.
The operation mode has been set
at AUTOMATIC, and the track
control system is not active.
Set the operation mode into
MANUAL ON.
P36