44
3.4.6 Changing buzzer sound
The buzzer sound can be set to the continuous sound or the intermittent sounds. This setting is
applied to all the buzzers.
1） Call the SET VALUE screen in according to the procedure of the section “3.4.1 Call of menu
mode screen”.
2） Select [BUZZER SOUND], and then press .
[BUZZER SOUND] screen is displayed.
3） Select [CONTINOUS], and then press .
4） Select the continuous sound or intermittent sound.
Select ON or OFF with , and then press .
When this setting change is canceled, press .
When selected to ON, the buzzers are set to the continuous sound. When selected to OFF, they
are set to the intermittent sound.
5） When press , it returns to the countdown screen and start operation with the changed
setting.
To Next Page
Loading...
