JRC JCX-161 - Operation Mode Change; Changing Operation Mode

Chapter 3 Operation
36
3.2 Operation mode change
To change the operation mode, use the LCD Display unit.
3.2.1 Changing operation mode
1) Press , and then the menu mode is displayed.
2) Select [SET VALUE], and then press .
Press . Since it become a password input state, input your 4 digit password, and then
press .
When your password is correct, the next menu screen is opened.
When your password is incorrect, "PASSWORD ERROR" is displayed, and then input your correct
password again.
0000 as the default password is set.