37
3) Select a function from the menu.
Since the SET VALUE screen is displayed, select [OPERATION MODE] with , and then
press .
[OPERATION MODE SETTING] screen is displayed.
4) Select an operation mode.
Select your required operation mode with , and then press . Then the selected
operation mode is turned to [ON].
When this setting change is canceled, press .
Multiple modes cannot be selected to [ON].
5) When press , It returns to the countdown screen and start operation with the changed
setting.
Normally, operate in the [MANUAL ON] mode.
When power supply is turned on, it starts in the [MANUAL ON]
mode.
A selected operation mode is not memorized.
To Next Page
Loading...
