JRC JCX-161 - Page 43

Chapter 2 Names and Functions of System Components
31
No.
Name
Function
①
Buzzer
(Audible alarm
device)
This is sounded at the first stage bridge audible alarm
or the various
alarms.
②
Reset button
switch
This resets the dormant period, and stops the visual indication and the
audible alarm.
The LEDs around the reset button switch is illuminating in normal state
and blinks after activated visual indication.
③
DIMMER
Button
This is the brightness control switch of the LED. When the button is
pressed, brightness is changed to “-> bright -> medium -> dark ->
bright
”
in the 3 steps.
④
Cable inlet
This is the cable inlet.
It supports diameters from 13 to 18mm. Securely tighten it so that water
cannot enter.