Operation
4-47
(2) Receiving a call from another controller
■ Procedure ■
1
1
1
.
.
.
If received an intercom call, the screen at right is
displayed and the ringing is started.
If not answered within 30 seconds, the state changes
busy. Also, touching the [CANCEL] button returns the
screen to the status display. Additionally, touching
the [ACCEPT] button makes the CONNECTED state.
2
2
2
.
.
.
When answering to the call, lift the handset and start
the communication.
Press PTT key to talk.
To finish the intercom, touch the [FINISH] button or
replace the handset on-hook.
- The OCC mark remains displayed even while
talking, because the called controller
(recipient) is in monitor mode.
- While using the intercom function between two
control panels, if the other main unit or the
other connected controllers, those screens
display as shown at right.
Note
To Next Page
Loading...