JRC JHS-800S - Settings for each Control Panel; LCD Adjustment

Settings & Registrations
5-3
5.3 Settings for each control panel
The following describes the procedure regarding individual settings such as visibility adjustment
and phone volume for each control panel.
5.3.1 LCD adjustment
The LCD conditions for visibility are adjustable as follows.
■ Procedure ■
1
1
1
.
.
.
From the main menu, touch the [SETUP]→ [DISP
SET] → [LCD ADJ] buttons.
2
2
2
.
.
.
After adjusting the LCD conditions, touch the [✓]
button to save them.
This menu includes the following settings
1. BRIGHTNESS ADJUSTMENT
ILLUMINATION: Select the kind of range from below.
DAY ····· For daytime use
(upto max brightness)
DUSK ··· For dusky environment
NIGHT ·· For night use
DIMMER: 0 - 14 steps
2. SCR SAVER SETTINGS
SCR SAVER: ON/OFF
TIME: 1 - 999 seconds
When setting the dimmer to 0, the screen is completely turned off. To increase the
brightness in this condition, touch the DIM+ button on the right upper corner of the
screen.
Note