JRC JHS-800S - Turning off the Power

Operation
4-4
4.2.2 Turning OFF the power
■ Procedure ■
1
1
1
.
.
.
Press the [PWR] button for at least 1 second.
In this case, the process varies, as shown below, according to the main unit and the status of the
connected controllers.
(1) In case of the main unit, the popup screen on the
right appears. Select one of the following.
・ [ALLOFF]: Turns off the power to the main unit
and all controllers.
・ [CANCEL]: Returns to the previous screen.
(2) In case of the controller being have the access
rights, the popup screen on the right appears. Select
one of the following.
・ [OFF]: Turns off the power to the controller.
・ [ALL OFF]: Turns off the power to the main unit
and all controllers.
・ [CANCEL]: Returns to the previous screen.
(3) In case of the controller not being have the access
rights, the popup screen on the right appears. Select
one of the following.
・ [OFF]: Turns off the power to the controller.
・ [CANCEL]: Returns to the previous screen.
Pressing the [PWR] button for
8 seconds or more turns off the power forcibly.
Note