JRC JHS-800S - Main Displays; Status Display

Names and Functions
2-2
2.2 Main displays
The LCD screen changes according to current conditions. This section describes the status
display, menu screen, and the screen for DSC messages.
2.2.1 Status display
(1) Parts for display
1
Indicates the ship’s MMSI.
10
Indicates the level of the squelch or preset
squelch. Additionally, indicates highlight
when the squelch is opened.
2
Indicates own ship’s position and that time.
11
Indicates the level of the loud speaker
volume.
3
Indicates transmitting information.
• Transmitting: TX
• Bad VSWR at TX: TX
VSWR
• PLL unlock: UNLOCK
12
Indicates the status of the access rights.
• Not occupied:
• Occupied:
4
Indicates the current scanning condition.
• Scanning: 16&
• Dual Watch: DW 16&
• Triple watch: TW 16&
13
Indicates the condition of the Bluetooth®
wireless speaker microphone. This icon
becomes blue after the pairing is finished.
5
Indicates highlight at CH16 (priority channel)
or CH70
14
Indicates current time as follows.
•
Universal time coordinated : UTC
• Local time: LT
6
Indicates the current region channel.
ITU/ USA/ CAN（Canada）/ IWW（Inland water
way） / P0/P1/P2 (Private)
15
Indicates the source of the ship's position.
• External device: (GPS)
• Manual input: (MAN)
• No input: NOGPS
7
Indicates the current channel.
16
Indicates CH70 watching continuously by
the DSC watchkeeping receiver.
8
Indicates the first two digits when a four-digits
channel is set.
17
Indicates that the currently selected
channel is a duplex channel for
communicating with coast stations.
9
Indicates the meter of receiving signal
strength indicator (RSSI).
18
Indicates the channel letters (A or B) for
the USA or Canada region channel mode.
1
2
3
4
5
6
7
8
9
12
13
14
15
16
17
18
11
10