JRC JHS-800S - Page 151

Specifications
9-17
(3) RMS interface
LAN Interface standard IEC61162-450 Ed.1 (2011-06) compliant
Output message IEC61162-1 Ed.4 (2010-11) compliant proprietary sentence
$PJRCL sentence (for RMS log saving)
$PJRCM sentence
(Device ID = "CV")
Data type Device model name, serial number, self-diagnosis information,
etc.
(4) BAM(MFD) interface
Serial Interface standard IEC61162-2 Ed.1 (1998-09) compliant
Protocol 38.4kbps, start 1bit, data 8bit, stop 1bit, non parity
LAN Interface standard, IEC61162-450 Ed.1 (2011-06) compliant
Input / Output sentence ALC sentence (“Manufacturer mnemonic code” field is unused)
(Interval is 20sec)
ALF sentence (“Manufacturer mnemonic code” and “Escalation
counter” fields are unused)
ACN sentence (Only input)
ARC sentence (“Manufacturer mnemonic code” field is unused)
HBT sentence (Interval is 10sec)
(Talker = "BN" or other, Device ID = "CV")
Data type Alert state of a device
(5) DIM interface
Serial Interface standard IEC61162-2 Ed.1 (1998-09) compliant
Protocol 38.4kbps, start 1bit, data 8bit, stop 1bit, non parity
LAN Interface standard, IEC61162-450 Ed.1 (2011-06) compliant
Input / Output sentence DDC sentence
(Talker = "NL" or other, Device ID = "CV")
Data type Equipment display brightness