JRC JMA-5208HS Installation Manual

ġ
4-36
4
[VIII] Master reset
Procedures 1. Press [RADAR MENU] key.
The Main Menu will appear.
2. Press [7] key.
The NAV Equipment Setting screen will appear.
3. Press [7] key.
The GPS Setting screen will appear.
4. Press [1] key.
The GPS Process Setting screen will appear.
5. Press [8] key.
Pressing [8] key will toggle between On and Off.
Select On for reset transmission.
6. After the entry has been completed, press [9] key to send the settings to
the GPS receiver.

JRC JMA-5208HS Specifications

General

Brand	JRC
Model	JMA-5208HS
Category	Marine Radar
Language	English