4-35
[VII] Position average time setting (Position Average)
Procedures 1. Press [RADAR MENU] key.
The Main Menu will appear.
2. Press [7] key.
The NAV Equipment Setting screen will appear.
3. Press [7] key.
The GPS Setting screen will appear.
4. Press [1] key.
The GPS Process Setting screen will appear.
5. Press [7] key.
From the pull-down menu, select Long, Standard, or
None.
The averaging level declines sequentially from Long, to Standard to None. As the
averaging level becomes low, position information update speed increases although
dispersion becomes large.
6. After the entry has been completed, press [9] key to send the settings to
the GPS receiver.
To Next Page
Loading...
Need help?
General
