ġ
4-34
4
[VI] HDOP level setting (DOP Level)
Procedures 1. Press [RADAR MENU] key.
The Main Menu will appear.
2. Press [7] key.
The NAV Equipment Setting screen will appear.
3. Press [7] key.
The GPS Setting screen will appear.
4. Press [1] key.
The GPS Process Setting screen will appear.
5. Press [5] key.
Any level listed on the pull-down menu can be
selected. The smaller the value, the higher the accuracy although fixing a position
becomes difficult.
6. After the entry has been completed, press [9] key to send the settings to
the GPS receiver.
To Next Page
Loading...
Need help?
General
