4-43
[III] Prohibitive satellite setting (NG SBAS)
Set the information from prohibitive SBAS satellite to be used or not to be used.
Procedures 1. Press [RADA MENU] key.
The Main Menu will appear.
2. Press [7] key.
The NAV Equipment Setting screen will appear.
3. Press [7] key.
The GPS Setting screen will appear.
4. Press [3] key.
The SBAS Setting screen will appear.
5. Press [3] key to select the information
from prohibitive SBAS satellite to be used
or not to be used.
Use : The information from prohibitive SBAS satellite is used
Unused : The information from prohibitive SBAS satellite is not used
6. Press the [6] key to send the setting value to SBAS receiver.
To Next Page
Loading...
Need help?
General
