ġ
4-44
4
[IV] Satellite number select mode setting (SBAS Select Mode)
Set the satellite number select mode.
Procedures 1. Press [RADA MENU] key.
The Main Menu will appear.
2. Press [7] key.
The NAV Equipment Setting screen will appear.
3. Press [7] key.
The GPS Setting screen will appear.
4. Press [3] key.
The SBAS Setting screen will appear.
5. Press [4] key to select the satellite
number select mode.
Manual : SBAS satellite number is set manually
AUTO : SBAS satellite number is set automatically
6. Press the [6] key to send the setting value to SBAS receiver.
To Next Page
Loading...
Need help?
General
