JSP Powercap Infinity - APPLICATIONS; UNPACKING & INSPECTION

4
APPLICATIONS:
PowerCap
®
Innity
®
is intended for use in areas where respiratory protection from dust, spores, mist and fumes, head protection from falling
objects and eye/face protection from high-speed particles is required.
PowerCap
®
Innity
®
provides respiratory protection to the requirements of EN12941 as a TH3P R SL device. PowerCap
®
Innity
®
has a
nominal protection factor of 500 and a UK assigned protection factor (APF) of 40. Note that in EU states the APF varies.
PowerCap
®
Innity
®
provides head protection to the requirements of EN397, ANSI Z89.1, CSA Z94.1 and GB2811. The head protection
offers protection from falling objects. As part of the PowerCap
®
Innity
®
, some aspects of the performance of the helmet are affected. It should
not be used in sub 5°C temperatures.
PowerCap
®
Innity
®
provides eye protection to the requirements of EN166 against high speed particles, Grade B. The PowerCap
®
Innity
®
has a face seal skirt to provide both respiratory protection and Field of Use Class 4 protection against dust particles. PowerCap
®
Innity
®
is a
loose tting item of respiratory protection. It may offer respiratory protection to the wearers of prescription eye wear.
PowerCap
®
Innity
®
also has the facility to be able to accept the JSP Sonis
®
helmet mounted hearing protection to provide protection against
the harmful effects of noise.
UNPACKING & INSPECTION:
The carry-case contains:
NO. ITEM NO. ITEM
1 EVO5
®
Safety Helmet 8 Drive Unit
2 Battery Pack 9 Charging Dock
3 Visor Carrier 10 6v 2.5A Power Supply
4 Cable Clip 11 Flow Test Unit
5 Face Seal Skirt 12 Strap for Carry-Case
6 Visor 13 User Instructions (Not shown)
7 Filters 14 Hygiene Bag for Soiled Items (Not shown)
1
7
2
3
4
8
12
9
10
11
5
6