Judo PROFI-PLUS - Technical Data

JUDO PROFI-PLUS 21
Data Sheet
9.4 Technical Data
The following applies for all the models of
the device:
– Pressure loss when clean (after back-
washing): 0.2 bar at the water flow rate
(nominal flow rate) given in the table.
– Maximum ambient temperature and wa-
ter temperature: 30°C (86°F).
– The water to be filtered must conform to
the European Drinking Water Regulati-
ons!
– Threaded connection to DIN 2999.
The nominal pressure denotes the pressure
class, according to which the filter must fulfil
the requirements to DIN 19632. The maxi-
mum operating pressure is lower, in order to
ensure the optimum function of the filter.
The backwashing volumetric flow given ap-
plies to 2-3 bar mains pressure and for a
completely opened flushing water valve.
Nominal Pressure
Model
Operating
Pressure
Nominal
Pressure
JPF
+
¾" – 2"
1.5 – 10 bar PN 16
Weight
Model Weight
JPF
+
¾"
4 kg
JPF
+
1"
4 kg
JPF
+
1¼"
4 kg
JPF
+
1½"
10 kg
JPF
+
2"
10 kg
Water flow rate
Model
Water flow
rate up to
Pressure loss
after
back-
washing
JPF
+
¾"
4.0 m³/h 0.2 bar
JPF
+
1"
4.5 m³/h 0.2 bar
JPF
+
1¼"
5.5 m³/h 0.2 bar
JPF
+
1½"
16.0 m³/h 0.2 bar
JPF
+
2"
17.0 m³/h 0.2 bar
Back-flush Volume Stream
Model
Back-flush Volume
Stream
JPF
+
¾"
0.2 - 0.4 l/s
JPF
+
1"
0.2 - 0.4 l/s
JPF
+
1¼"
0.2 - 0.4 l/s
JPF
+
1½"
0.3 - 0.8 l/s
JPF
+
2"
0.3 - 0.8 l/s