04
Installation
The Juke can be installed in one of two locations:
Rack or Table-Top
Wiring
1. Placed onto a shelf or a flat surface. For best performance, do not rest any other equipment
on top of it or place the unit in a location that might cause the unit to run hot
2. Mounted into a 19” equipment rack using the optional rack ears that come with the
shipment. There are two aluminum plates that attach to the Juke with the 4 screws provided
and are used to screw the unit into the rack.
Next connect the speaker wiring. This may require a wire stripper, a small screwdriver, and
scissors:
To Next Page
Loading...