−1 −
1. OUTLINE
1-1 Features
1) Different from the conventional sewing machines with oil pan type, this machine has no oil reservoir and stain
of the materials and oil stain when performing maintenance or moving the machine do not occur.
2) For DS type, an exclusive complete dry hook is employed and there is no oil tank. It is possible to completely
protect the sewing materials from oil stain.
3) A compact AC servomotor is built in the machine head. It is not necessary to fix the belt on the machine head
when setting up the machine, and to perform adjustment as before. In addition, there is no stain from the worn
powder of V-belt.
4) Workability such as handling of materials, easy-to observe needle entry area, etc. is taken seriously. Sewing
space is enough expanded.
5) Noise and vibration when sewing are decreased to improve the sewing environment and to decrease the
operator’s burden.
6) Smooth feeding of materials has been obtained by the improvement of feed dog and thread take-up lever. As
a result, low-tension sewing has been realized.
7) Calibration markings have been added to the respective adjusting sections such as presser spring regulator
and so on considering adjusting operations.
8) The superior portions of JUKI existing lockstitch machines with automatic thread trimmer have been succeeded
to the operation panel and the control box of these machines, and reliability and easy operability have been
improved.
To Next Page
Loading...
Need help?
General
