LK-1900A, 1901A, 1902A (September, 2003) 6/7
17
2
7
2.4
7
2.4
2.8
7
27
37
37.4
10
37
2.8
27.4
10
24.8
41.5
WORK CLAMP FOOT AND FEED PLATE FOR LK-1902A (for belt-loop attaching)
Work clamp foot Feed plate Number of pattern
Provided as
13544465 14143002
standard
17
LK-1902A-SS
18
LK-1902A-HS
13545660 13545504
Option
19
For large size
20
21
13545801
22
13547161
13547005
22
＊A finger guard is included in the presser foot.
Option
For extra large
size
● Functional settings, such as pattern numbers, enlargement/reduction
scales, swing speeds and needle thread tensions can be established
through the operation panel with ease.
● Standard sewing patterns can be assigned to pattern keys P1 to P50.
Any of the sewing patterns assigned to the P1 to P25 pattern keys can
be activated with a touch of the corresponding key. This means that
workability is improved by assigning 25 sewing patterns that are most
frequently used to those pattern keys.
● As many as 20 different cycle sewing patterns, each of which
combines a maximum of 30 different sewing patterns, can be stored
in the memory.
● The operation panel has been installed at an angle and can be placed
at the top, bottom, right or left part of the table according to the
operator's preference.
● A large color LCD touch panel has been adopted for the display. It gives
clear displays that allow the operator to understand operating procedures.
● The IP-200B panel can be connected to a personal computer and can store
data on SmartMedia. This allows data to be exchanged or shared among
sewing machines installed in a factory or among remote factories.
● The IP-200B panel has been provided with a process improvement
supporting feature through the indication of the operational state of the
sewing machine, and a maintenance and management feature for
indicating the needle changing timing and cleaning timing.
LK-1900A-SS/Installation of the IP-200B
OPERATION PANEL (You can choose operation panel.)
STANDARD PANEL
IP-200B
To Next Page
Loading...
