JUKI DLN-9010 - Page 124

LK-1900A, 1901A, 1902A (September, 2003) 7/7
φA
φB
A
B
A
B
A
B
SM8040302TP
L
A
B
SM8040302TP
L
77
2422
14 14
WHEN YOU PLACE ORDERS
TABLE OF THE OPTIONAL PARTS
LK1900A S000
(Eyelet buttonhole bartacking)
(Belt-loop attaching)
MC596
Application Code
Standard S
For heavy-weight materials H
For foundation F
For knits and knitted
materials
M
With large hook
for heavy-weight materials
W
Power supply Code
3-phase 200〜240V E
Single-phase
200〜240V K
CE 200〜240V
(not provided with
power switch)
N
Attachment Code
Not provided 000
Work clamp foot Code
Standard S
LK1902A S000
Application Code
Standard S
For heavy-weight materials H
Attachment Code
Not provided 000
Work clamp foot Code
Standard S
LK1901ASS000
Application Code
Standard S
Attachment Code
Not provided 000
Work clamp foot Code
Standard S
Operation panel Code
Standard panel SS
IP-200B PB
● Machine head
● Control box
(Bartacking)
● Foot pedal for standing work
(optional)
＊To connect the cable asm. to the electrical box,
conversion cable (separately available) is necessary.
● 2-pedal unit for standing work
＊
[Part No. M85205800A0]
● Pedal switch conversion cable asm.
[Part No. M90125900A0]
● PK-57
＊
[Part No. GPK570010B0]
● Pedal switch conversion cable asm.
[Part No. M90135900A0]
Name of parts Type Part No.
Feed plate blank Without knurl/with plating Sewing area 20×40 14120109
With knurl/with plating Sewing area 20×40 14120307
Without knurl/stainless steel
＊
Sewing area 20×40 14120505
Without knurl/with plating Sewing area 30×40 40021855
Without knurl/without plating Sewing area 30×40 40021856
Without knurl/stainless steel
＊
Sewing area 30×40 40021857
With knurl/with plating Sewing area 30×40 40021858
With knurl/without plating Sewing area 30×40 40021859
Work clamp foot
face plate (asm.)
Face plate for presser blank 14121263
Presser blank With knurl/with plating (right) Sewing area 20×40 14121701
With knurl/with plating (left) Sewing area 20×40 14121800
With knurl/with plating (right) Sewing area 30×40 40021851
With knurl/with plating (left) Sewing area 30×40 40021852
With knurl/without plating (right) Sewing area 30×40 40021853
With knurl/without plating (left) Sewing area 30×40 40021854
Work clamp foot blank
With knurl/with plating (right) 40021869
With knurl/with plating (left) 40021870
Needle hole guide A=1.6 B=2.6 With relief slit Standard type B2426280000
A=1.6 B=2.0 Without relief slit F and M types D2426282C00
A=2.3 B=4.0 Without relief slit for heavy-weight material 14109607
A=2.7 B=3.7 Without relief slit for extra heavy-weight material D2426MMCK00
Finger guard (1)
A=56.5 B=64 13533104
A=59 B=74 For extra-large bartacking 13548300
Finger guard (2)
A=66.5 B=43 For lengthwise bartacking 13573407
Finger guard (3)
A=21.5 B=35.5 L=67 For lengthwise bartacking 14135305
Finger guard (4)
A=21.5 B=35.5 L=58.5 For specially ordered work clamp 14120000
t=1.2
＊Stainless steel t=0.5
t=3.2
8
www.egemakine.com.tr