JUKI IP-100 - Setting the Reference of Stitch Base Line

22
0.0 0.0 0.0
1
3
3
1
2
(2) Setting the reference of stitch base line
• Reference position of stitch base line can be set to left, center and right.
■How to set
1) Press switch 1.
2) Press switch 2.
3) Figure on the left side
shows the reference of
center stitch base line.
Every time switch 3 is
pressed, reference of left
stitch base line, that of right
stitch base line and that of
center stitch base line are
changed over and set
alternately.
4) Press switch 1 and the
screen returns to the
previous one.
Reference of left
stitch base line
Reference of center
stitch base line
Reference of right
stitch base line
Reference of left
stitch base line
Reference of center
stitch base line
Reference of right
stitch base line