JUKI IP-100 - Page 45

39
Setting of the position of sewing start
Set the position of sewing start with ▲/▼ of switch 3.
Sewing start, root Sewing start, crest
Setting of the stop position right/left
Set the stop position with ▲/▼ of switch 4.
Stop position, optional Stop position, right Stop position, left
Setting of the stop position root/crest
Set the stop position with ▲/▼ of switch 5.
Stop position, optional Stop position, root Stop position, crest
● Start from crest and start from root of scallop
Start from
crest
Start from
root
Normally, scallop starts the
sewing with the pattern of
start from root. However,
start from crest can be
selected by changing the
setting.
Start of sewing
Needle position after
thread trimming