79
[Setting procedure of Level 1]
5
5
6
7
1
2
・ Change set value with “+/–”
Key of switch 5.
The set value has been
changed from “0” to “3”.
・ When this changed value is
acceptable, press switch 7.
When you desire to return
the value to the previous
one, press switch 6.
・ Turn OFF the power switch
and turn ON the power
switch after approximately
one second.
・ Change of the set value is
determined by turning OFF
the power switch.
1) Press switch 1 for
approximately three
seconds.
2) Press switch 2.
To Next Page
Loading...
