– 120 –
For LK-1902A
Part No.: 40006887
4x2 drill depth 10 rear side (Table stand mounting holes) Oil drain funnel mounting hole
Drawer stopper mounting position (1 position on rear side) 3x7 drill, depth 6
JUKI logotype 17 drill
8 drill 28 drill
9 drill x20 depth Counterbore depth 17 2x2 drill depth 10 rear side (Power switch mounting holes)
4x8 drill R2 (all periphery)
30 drill 51 depth Counterbore depth 16 Top of a table
(2) Table type for lateral Installation
To Next Page
Loading...
