JUKI LK-1900A Series - Standard Patterns Table (LK-1903 A)

– 51 –
(2) Table of Standard Patterns (LK-1903A)
The number of stitches and the standard sewing lengths X and Y are as
specified in the table below.
Pattern Stitch Sewing thread Standard length Standard length Pattern Stitch Sewing thread Standard length Standard length
No. sape (pcs.) X (mm) Y (mm) No. Sape (pcs.) X (mm) Y (mm)
1•34 6-6 18•44 6
2•35 8-8 19•45 8
3 10-10 20 10 3.4 0
4 12-12 21 12
5•36 6-6 22 16
6•37 8-8 23•46 6
7 10-10 24 10 0 3.4
8 12-12 25 12
9•38 6-6 26•47 6-6
10•39 8-8 3.4 3.4 27 10-10
3.4 3.4
11 10-10 28•48 6-6
12•40 6-6 29 10-10
13•41 8-8 30•49 5-5-5
14 10-10 31 8-8-8
3.0 2.5
15•42 6-6 32•50 5-5-5
16•43 8-8 33 8-8-8
17 10-10
* Standard sewing lenghts X and Y given above are given assvming that the scale is 100.
Use the patterns No. 34~50 with hole diameter ø1.5mm or less.