JUKI LK-1900A Series - Y Origin Sensor Adjustment

– 30 –
(21) Position of the mechanical origin
Standard Adjustment
(22) Adjusting the Y origin sensor
Standard Adjustment
A : 147mm (LK-1900A, 1902A)
: 146mm (LK-1901A, 1903A)
B : 61mm (LK-1900A, 1902A)
: 62mm (LK-1901A, 1903A)
C : 74mm (LK-1900A, 1902A)
: 73mm (LK-1901A, 1903A)
Work feed plate
C
A
B