JUKI LK-1900BN Series - Page 63


60

No. Function Setting range State when delivered Remarks
U076
Correction of thread waste retaining position
With this switch, the timing to start traveling from the
thread clamping position to the thread releasing/thread
waste retaining position can be changed.
* This memory switch is displayed only for the LK-
1900BBN, LK-1903BBN.
−10 to 10
(In the range
of −344°
to 64° in
increments of
4°)
0
U085
Thread waste suction actuation time
Length of time to be elapsed from the turning-ON to
the turning-OFF of the thread waste suction device.
* This memory switch is displayed only for the LK-
1900BBN, LK-1903BBN.
110 to 1000
ms
LK-1900BBN :110
LK-1903BBN :140
U086
Thread waste suction actuation time
Length of time to be elapsed from the turning-ON of
the thread waste suction nozzle/thread waste suction
to the turning-OFF of it
* This memory switch is displayed only for the LK-
1900BBN, LK-1903BBN.
LK-1900BBN :
110 to 1000
ms
LK-1903BBN :
140 to 1000
ms
LK-1900BBN :110
LK-1903BBN :140
U087
Thread waste suction nozzle actuation time
Length of time to be elapsed from the turning-ON of
the thread waste suction nozzle to the turning-OFF of it
* This memory switch is displayed only for the LK-
1900BBN, LK-1903BBN.
110 to 1000
ms
110
U088
Number of stitches for releasing thread-waste
Time lapse (i.e., the number of stitches to be sewn)
from trimming of thread at the beginning of sewing to
releasing of thread
* This memory switch is displayed only for the LK-
1900BBN, LK-1903BBN.
0 to 100
stitches
LK-1900BBN :5
LK-1903BBN :0
U089
Bird's nest suction time
Time during which the thread tangling in at the begin-
ning of sewing (so-called bird's nest) is being sucked
* This memory switch is displayed only for the LK-
1900BBN, LK-1903BBN.
100 to 1000
ms
100
U090
Rest time to the start of suction of bird's nest
Time lapse from trimming of shorter thread remaining
on the material to suction of thread tangling in at the
beginning of sewing
* This memory switch is displayed only for the LK-
1903BBN.
80 to 500 ms 80
U239
Choice of language.
With this switch, the language to be displayed on the panel is selected.
* The number of selectable languages differs with the type of
sewing machine shipped
: Not yet selected (display in English)
: Japanese : English
: Chinese (simplied characters)
: Chinese (traditional Chinese) : Spanish
: Italian : French : German
: Portuguese : Turkish : Vietnamese
: Korean : Indonesian : Russian
- Not yet selected
(display in En-
glish)
U245
Grease-up needle.
0 to
120000000
(Stitches)
(Cannot be set)
The number of stitch-
es can be cleared by
keeping the RESET
key held pressed.