JUKI LU-2810 Series - (10) Feed Cam Timing; Horizontal Feed Cam Timing; Vertical Feed Cam Timing

– 18 –
(10) Feed cam timing
WARNING :
Turn OFF the power before starting the work so as to prevent accidents caused by abrupt start of the
sewing machine.
Standard adjustment
1) Horizontal feed cam timing
2) Vertical feed cam timing
No. 2 screw
1
2
Main shaft
4
5
6
3
7
Lower shaft
A
B
4
5
6
Top end of needle
4
, top surface of
throat plate
5
and
top surface of feed
dog
6
are aligned.
[Conditions]
• Feed amount : maximum
• Needle bat at lowest dead point
[Conditions]
• Feed amount : 6 mm
• When needle is lowered
and feed dog is rised.
海外講習会用121122LU-2810(-7)EM