– 58 –
・
Setting the needle thread tension function (
E
)
1) When
E
is pressed, the needle
thread tension function selection screen is dis-
played.
2) Select the status (enable/disable) of the nee-
dle thread tension function with button
.
3) When
is pressed, the value you have
input is conrmed and the screen returns to
the "sewing-start reverse feed stitching data
edit screen".
* In the case (disable) is selected in the
aforementioned item number 2, needle thread
tension edit button
is displayed on
the sewing-start reverse feed stitching data
edit screen.
<Needle thread tension function selection screen>
・
Setting the pause and stitch alignment function (
F
)
1) When
F
is pressed, the pause and
stitch alignment function selection screen is
displayed.
2) Select the status (enable/disable) of the pause
and stitch alignment function with button
.
3) When
is pressed, the value you have
input is conrmed and the screen returns to
the "sewing-start reverse feed stitching data
edit screen".
* In the case (enable) is selected in the
aforementioned item number 2, pause and
stitch alignment temporary-stop time edit but-
ton
is displayed on the sewing-start
reverse feed stitching data edit screen.
<Pause and stitch alignment function selection screen>
To Next Page
