–
66
–
26.縫い速度一覧表
•PLC-1710,PLC-1760
交互上下量 縫い目 6mm 以下
縫い目 6mm を越
え 9mm 以下
〜 3mm 以下 2500sti/min 1800sti/min
3mm を越え
4mm 以下
1800sti/min 1800sti/min
4mm を越え
6.5mm 以下
1600sti/min 1600sti/min
•PLC-1710-7,PLC-1760-7
•PLC-1760,PLC-1760-7
針 幅 最高縫い速度
4mm 〜 10mm 2500sti/min
12mm 2000sti/min
26. SEWING SPEED TABLE
2) 針幅による最高縫い速度
1) 交互上下量による最高縫い速度
最高縫い速度は、縫製条件により下表のように設定されています。
各条件に合わせて最高縫い速度をセットし、設定値を越えないようにしてください。
交互上下量 縫い目 6mm 以下
縫い目 6mm を越
え 9mm 以下
〜 2.5mm 以下 2500sti/min 1800sti/min
2.5mm を越え
4mm 以下
2200sti/min 1800sti/min
4mm を越え
4.75mm 以下
1800sti/min 1800sti/min
4.75mm を越え
6.5mm 以下
1600sti/min 1600sti/min
•PLC-1760L
交互上下量 縫い目 9mm 以下
縫い目 9mm を越
え 12mm 以下
〜 4.75mm 以下 1800sti/min 1600sti/min
4.75mm を越え
6.5mm 以下
1600sti/min 1600sti/min
The maximum sewing speed has been specifi ed in accordance with sewing conditions as shown in the table below.
Set the maximum sewing speed appropriately in accordance with the sewing conditions given taking care not to exceed
the corresponding specifi ed value.
1)
Maximum sewing speed in accordance with the amount of alternate vertical movement of the walking foot and presser foot
2) Maximum sewing speed in accordance with the needle gauge
• PLC-1710-7, PLC-1760-7
• PLC-1710, PLC-1760
Amount of alternate
vertical movement
of the walking foot
and presser foot
Stitch length :
6 mm or less
Stitch length : More
than 6 mm and
9 mm or less
Less than 3 mm 2500 sti/min 1800 sti/min
More than 3 mm
and 4 mm or less
1800 sti/min 1800 sti/min
More than 4 mm
and 6.5 mm or less
1600 sti/min 1600 sti/min
Amount of alternate
vertical movement
of the walking foot
and presser foot
Stitch length :
6 mm or less
Stitch length : More
than 6 mm and
9 mm or less
Less than 2.5 mm 2500 sti/min 1800 sti/min
More than 2.5 mm
and 4 mm or less
2200 sti/min 1800 sti/min
More than 4 mm
and 4.75 mm or less
1800 sti/min 1800 sti/min
More than 4.75 mm
and 6.5 mm or less
1600 sti/min 1600 sti/min
Amount of alternate
vertical movement
of the walking foot
and presser foot
Stitch length :
9 mm or less
Stitch length : More
than 9 mm and
12 mm or less
Less than 4.75 mm 1800 sti/min 1600 sti/min
More than 4.75 mm
and 6.5 mm or less
1600 sti/min 1600 sti/min
• PLC-1760L
• PLC-1760, PLC-1760-7
Needle gauge Max. sewing speed
4 mm to 10 mm 2500 sti/min
12 mm 2000 sti/min