JUKI SC-920 - Overlapped Stitching Pattern

– 18 –
❻
❺❹❸
❶
❷
❼
Ⓒ
Ⓐ
Ⓓ
A : Number of stitches of normal stitching setting
0 to 15 stitches
B : Number of stitches of reverse stitching setting
0 to 15 stitches
C : Number of stitches of normal stitching setting
0 to 15 stitches
D : Number of times of repetition
0 to 9 times
(Caution) When process D is set to 5 times, the sewing is repeat-
ed as A → B → C → B → C.
Ⓑ
(2) Overlapped stitching pattern
Overlapped stitching pattern can be programmed.
[Setting procedure of the overlapped
stitching]
1) Effective/ineffective of the overlapped
stitching pattern can be changed over
by pressing
switch
❷
.
When the overlapped stitching pattern
is rendered effective, LED
Ⓓ
lights up.
2) Select a process (A, B, C or D) the
number of stitches for which is to be
changed by using
switch
❹
.
The number which is ashing on and
off represents the process which is
being set.
A
B
C
B
C
D
3) Change the number of stitches for the selected process by using switch
❺
and
switch
❻
.
4) Press switch
❸
to conrm the change you have made.
(The sewing machine does not run unless the setting has been conrmed by pressing switch
❸
.)
(Caution) The overlapped stitching pattern is carried out under automatic operation mode. Once the pedal is de-
pressed, the sewing machine will automatically perform sewing of the number of overlapped stitches.