JUMO GmbH & Co. KG
Delivery address: Mackenrodtstraße 14
36039 Fulda, Germany
Postal address:
36035 Fulda, Germany
Phone: +49 661 6003-0
Fax: +49 661 6003-607
Email: mail@jumo.net
Internet: www.jumo.net
JUMO Instrument Co. Ltd.
JUMO House
Temple Bank, Riverway
Harlow, Essex CM20 2DY, UK
Phone: +44 1279 635533
Fax: +44 1279 635262
Email: sales@jumo.co.uk
Internet: www.jumo.co.uk
JUMO Process Control, Inc.
6733 Myers Road
East Syracuse, NY 13057, USA
Phone: 315-437-5866
1-800-554-5866
Fax: 315-437-5860
Email: info.us@jumo.net
Internet: www.jumousa.com
70357100T10Z002K000
PROFINET-RT class B
Extra code 63 enables operation as a PROFI-
NET-RT device according to IEEE 802.1 in a
PROFINET network.
The GSDML that is part of the standard deliv-
ery is also available as a download on our
website.
The connection is made via two RJ-45 ports
on the rear of the device.
The slots can be configured in the setup pro-
gram. This configuration can then be printed
out as a PDF file.
All the standard Ethernet applications such as
setup, PCC/PCA, and web server are also
available here.
The integration of acyclical services is also
possible. It is explained in the enclosed inter-
face description.
Recording function (extra code)
Four analog channels and three digital chan-
nels can be recorded. They appear as line re-
corders with a time stamp. The recorder image
is always present. It is only possible to use the
"history" function and to extract the registry
data via PCC, PCA by means of the extra code
213 recording function.
Setup program
The setup program makes the controller easy
to configure and parameterize using a PC.
Data sets can thus be created, edited, and
transferred to the controller, and can be ex-
tracted from there. The data can be saved and
printed. The setup program supports multiple
national languages, including German, Eng-
lish, and French.
External relay or logic modules
ER8 (accessories)
By connecting two ER8 external logic mod-
ules, eight relay or digital outputs (12 V/20 mA)
can be added to the device in each case. The
control takes place via interface RS422/
RS485. The setup program is essential for the
configuration of the ER8 module that is mount-
able on the DIN-rail. Two ER8 modules can be
connected.
To Next Page
Loading...
Need help?
General
