Jung Smart Visu Server Series - Page 126

SV- SERVER / SV-SERVER-INT 125 / 187
Base Setpoint:
The Smart Visu Server supports KNX climate control by specifying a base setpoint (1).
The group address for the base setpoint specification can be entered in the input field (2).
In the drop-down menu (3), you can select an initialisation address for the current base
setpoint specification, which is to be output on initialising the Smart Visu Server.
A KNX group address can be entered in the input field (4), from which the setpoint
temperature can be read. In the drop-down menu (4), you can select an initialisation
address for the setpoint temperature, which is to be output on initialising the Smart Visu
Server.
Figure 97: Parameters of the "Base Setpoint" function
The function possesses the following individualisation options within the icon library (6).
KNX function
Selection of the icon library in SV-Control
Operating and display element in SV-Home
Base Setpoint
Table 46: Display of the "Base Setpoint" function
1
2
3
4
5
6