Jung Smart Visu Server Series - Page 127

SV- SERVER / SV-SERVER-INT 126 / 187
Setpoint shift :
The "Setpoint Shift" function (1) can be used to influence a KNX climate control system
using a setpoint shift.
The group address for a setpoint shift can be entered in the input field (2) and the
corresponding feedback address in the input field (3). In the drop-down menu (4), you can
select an initialisation address for the current setpoint shift, which is to be output on
initialising the Smart Visu Server.
In addition, you can enter a group address for reading out and displaying the setpoint
temperature (KNX 2 Byte) in the input field (5). In the drop-down menu (6), you can select
an initialisation address for the setpoint temperature, which is to be output on initialising
the Smart Visu Server.
Figure 98: Parameters of the "Setpoint Shift" function
The function possesses the following individualisation options within the icon library (7).
KNX function
Selection of the icon library in SV-Control
Operating and display element in SV-Home
Setpoint Shift
Table 47: Display of the "Setpoint Shift" function
1
2
3
4
5
6
7