Jung Smart Visu Server Series - Page 136

SV- SERVER / SV-SERVER-INT 135 / 187
8.4.4.3 Values
If required, the function type "Values" can be depicted by various differentiated KNX
functions.
Display 1-Bit (boolean):
The function "Display 1-bit" (1) is the KNX function for displaying one-bit status values of
the KNX system.
The function reads the KNX group address entered in the input field "Status (1 Bit)" (2). In
addition, the current status of the function can be polled by defining two initialisation
addresses (3) on starting the system.
Figure 104: Parameters of the "Display 1-bit values" function
The function possesses the following individualisation options within the icon library (4).
KNX function
Selection of the icon library in SV-Control
Operating and display element in SV-Home
Display 1-bit
Table 53: Display of the "Display 1 Bit" function
1
2
3
4