5. OPERATION
5.8 FILTER MENU (filter button)
Filter menu shows filter settings.
Adjustments are made by pushing and turning SELECT knob (see 5.1).
FLT MODE DYNAMIC >>
ON PEAK ON
first page
FLT: filter on/off
(by pushing SELECT knob, green LED in button
lits if function block is switched on)
MODE: low shelving / peaking / high shelving
DYNAMIC: dynamic filter mode on/off
>>: switches to second page
FREQ Q RANGE THRSH
20 0.4 4.2 -32
second page
FREQ: filter frequency 20...20.000 Hz
Q: filter Q-factor 0.4...9.9 (only for peaking filter)
RANGE: cut or boost -15.0...+15.0 dB
THRSH: threshold -50...0 dBFS (only for dynamic
filter mode)
5.9 SETUP MENU (setup button)
For opening, selection and setting of the UTILITY menus.
Adjustments are made by pushing and turning SELECT knob (see 5.1).
SETUP for opening and selection of utitlity menus
To Next Page
Loading...