Jungheinrich ECP 100-3 - Starting up the Truck

0803.GB
E 8
3 Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and the load lifting equipment)
for visible damage.
– Visually check the battery attachment and the cable connections.
4 6 9
16
28
11
19
10
17
0803.GB
E 8
3 Starting up the truck
f
Before starting or operating the truck, or before lifting any loads, the driver has to
make sure that nobody is within the danger area.
Checks and operations to be performed before starting daily work
– Visually check the entire truck (especially the wheels and the load lifting equipment)
for visible damage.
– Visually check the battery attachment and the cable connections.
4 6 9
16
28
11
19
10
17