Jungheinrich EJD 220 User Manual

8.2.9 Choose length of the new master code (4-6 digit) and add user codes
Z
The master code is factory set to a four-digit entry: If necessary, the four-digit master
code can be changed to a five or six-digit entry. Before the master code length can
be changed, all user codes must be deleted. The length of the user code (4-6 digit)
is always determined by the length of the master code.
Requirements
– To prepare the truck for operation, see page 106.
Procedure
• Delete all user codes, see page 115.
• Enter the new master code (4-6 digit), see
page 107.
• Add user codes again, see page 109.
The length of the new master code is now changed
and user codes have been added.
76
73
74
75
78
77
116
04.19 en-GB

Jungheinrich EJD 220 Specifications

General

Brand	Jungheinrich
Model	EJD 220
Category	Forklifts
Language	English