Hydraulic function lock settings
No. Function Range Standard
setting
Comments
3
,
4
2338 Lift Lower 0 - 15 1 0 = Lifting and lowering always
released
1 = Lifting only with authorisation
2 = Lifting only when stationary
3 = Lifting only with authorisation
and only when stationary
4 = Lowering only when stationary
5 = Lifting and lowering only with
authorisation
6 = Lifting only when stationary,
lowering only with authorisation
7 = Lowering only with
authorisation, lowering only with
authorisation
8 = Lowering only when stationary
9 = Lifting only with authorisation,
lowering only when stationary
10 = Lifting and lowering when
stationary
11 = Lifting only with authorisation
and only when stationary,
lowering only when stationary
12 = Lowering only with
authorisation and only when
stationary
3)
With authorisation = with tiller in travel range (F) or with "slow travel" switch applied
4)
Stationary = No travel operations performed
128
04.19 en-GB
To Next Page
Loading...
Need help?
General
