7.10.6 Displaying the Log-in Process
The use of the last different access codes is displayed during the log-in process. The
last log-in is displayed first.
Z
If multiple access codes are logged as being displayable simultaneously, the display
area can be moved by scrolling forward or back.
Requirements
– The truck is switched on, see
page 139.
Procedure
• Press the key below the "Settings"
symbol (85).
• Press the key below the "Log-in
process" symbol (93).
• Enter the set-up code using the keys
below the display unit (55).
The set-up code entered is shown as
filled-in circles.
• To scroll forward, press the button
under the "Down selection" symbol (92)
as many times as necessary.
The display area moves: Additional
earlier log-ins are displayed.
• To scroll back, press the button under
the "Up selection" symbol (94) as many
times as necessary.
The display area moves: More recent
log-ins are displayed.
• To return to the main menu, press the
key below the "Back" symbol (89).
The log-in process is displayed.
7.11
ISM access module (o)
Z
*If the truck is equipped with an ISM access module or Can Code refer to the “ISM
Access Module” or "CanCode" operator manuals.
143
04.19 en-GB
To Next Page
Loading...
Need help?
General
