3.5 Parking the truck securely
WARNING!
An unsecured truck can cause accidents
Parking the truck on an incline, without the brakes applied or with a raised load or
load handler is dangerous and is strictly prohibited.
u
Park the truck on a level surface. In special cases the truck may need to be
secured with wedges.
u
Fully lower the load handler.
u
Select a place to park where no other people are at risk of injury from the lowered
load handler.
u
If the brakes are not working, place wedges underneath the wheels of the truck to
prevent it from moving.
EJE 220 / 225 / 230 / 235
Park the truck securely
Procedure
• Park the truck on a level surface.
• Fully lower the load handler (60):
• Press the lower button (50).
• Using the tiller (8) set the drive wheel
to the straight ahead position.
• Switch off the truck, to do this:
• Turn the key in the key switch (14)
anti-clockwise as far as it will go.
Remove the key from the key
switch (14).
• For CanCode (56) press the O key
(o).
• Press the red button on the ISM
access module (o).
• Press the Emergency Disconnect
(10).
The truck is parked.
71
04.19 en-GB
To Next Page
Loading...
Need help?
General
