2 Transport
WARNING!
Accidental movement during transport
Improper fastening of the truck and mast during transport can result in serious
accidents.
u
Loading must only be performed by specialist personnel trained for this purpose.
The specialist personnel must be instructed in securing loads on road vehicles and
handling load securing devices. In each case correct measurements must be
taken and appropriate safety measures applied.
u
The truck must be securely fastened when transported on a lorry or a trailer.
u
The lorry or trailer must have fastening rings.
u
Use wedges to prevent the truck from moving.
u
Use only fastening belts with sufficient strength.
u
Use non-slip materials to securing the load aids (pallet, wedges, ...) e. g. non-slip
mats.
Securing the truck for transport
Requirements
– Load the truck.
– Truck parked securely, see page 71.
Tools and Material Required
– Lashing straps
– Edge protectors
– Wooden beam or pallet
Procedure
• Position the wooden beam or pallet
between the front of the transport
vehicle and the load handler to
ensure a positive fit between the front
of the transport vehicle and the load
handler.
• Attach the lashing straps (40) to the
industrial truck and the transport
vehicle and tension sufficiently.
Z
Use edge protectors to protect the truck and the lashing straps.
The truck can now be transported.
37
04.19 en-GB
To Next Page
Loading...
Need help?
General
