.
E Operation 57
.
1 Safety Regulations for the Operation of Forklift Trucks 57
2 Displays and Controls 59
2.1 EJE 220r / EJE 225r Tiller 65
2.2 Battery discharge indicator 66
2.3 Battery discharge monitor 66
3 Preparing the Truck for Operation 67
3.1 Checks and Operations to Be Performed Before Starting Daily Work 67
3.2 Preparing the truck for operation 68
3.3 Making the EJE 220r / 225r operational 69
3.4 Checks and operations to be carried out when the truck is operational 70
3.5 Parking the truck securely 71
4 Industrial Truck Operation 73
4.1 Safety regulations for truck operation 73
4.2 Emergency Disconnect 75
4.3 Automatic braking 77
4.4 Travel 78
4.5 Slow travel 80
4.6 Steering 81
4.7 Brakes 81
4.8 Load handler raise/lower 83
4.9 Lifting, transporting and depositing loads 88
5 Troubleshooting 97
5.1 Truck does not start 98
5.2 Load cannot be lifted 99
6 Operating the truck without its own drive system 100
6.1 Release and activate the drive wheel brake 100
7 Optional equipment 103
7.1 Emergency operation with service key GF60 103
7.2 Tiller with buttons on both faces 105
7.3
Keypad (CanCode) (o) 106
7.4 Setting the truck parameters with CanCode 125
7.5 Parameters 127
7.6 Setting the Battery Parameters with CanCode 129
7.7
CanDis Display Instrument (o) 131
7.8 Display unit (2 inch display) 133
7.9 General Information about the Use of Keyless Access Systems 138
7.10 Using the Display: 139
7.11
ISM access module (o) 143
.
F Industrial Truck Maintenance 145
.
1 Operational Safety and Environmental Protection 145
2 Maintenance Safety Regulations 146
2.1 Working on the electrical system 147
2.2 Consumables and used parts 147
2.3 Wheels 147
2.4 Hydraulic system 148
3 Lubricants and Lubrication Schedule 150
3.1 Handling consumables safely 150
3.2 Lubrication Schedule 152
3.3 Consumables 153
8
04.19 en-GB
To Next Page
Loading...
Need help?
General
