Juniper EX2300 - Page 4

Each EX2300 switch model has front-panel 10/100/1000BASE-T access ports and 10GbE uplink ports
for connecng to higher-level devices. The uplink ports support small form-factor pluggable plus (SFP+)
transceivers. All switches except the EX2300-C-12T, EX2300-24T, and EX2300-48T support Power
over Ethernet (PoE) and Power over Ethernet Plus (PoE+) for powering aached network devices.
NOTE: There’s a separate Day One+ guide for the 12-port EX2300-C switch models. See
EX2300-C on the Day One+ webpage.
This guide covers the following AC-powered switch models:
• EX2300-24T: 24 10/100/1000BASE-T ports
• EX2300-24P: 24 10/100/1000BASE-T PoE/PoE+ ports
• EX2300-24MP: 16 10/100/1000BASE-T PoE+ ports, 8 10/100/1000/2500BASE-T PoE+ ports
• EX2300-48T: 48 10/100/1000BASE-T ports
• EX2300-48P: 48 10/100/1000BASE-T PoE/PoE+ ports
• EX2300-48MP: 32 10/100/1000BASE-T PoE/PoE+ ports, 16 100/1000/2500/5000/10000BASE-T
PoE/PoE+ ports
2