Figure 135: Connect a QSFP28 or QSFP+ Acve Opcal Cable
1— Transceiver 2— Port on the device
6. Repeat Step 5 for all ports to which the cable must be connected.
7. Secure the cable so that it does not support its own weight as it hangs to the oor. If there is a cable
management system, arrange the cable in the cable management system to prevent the cable from
dislodging or developing stress points. Place excess cable out of the way in a neatly coiled loop in the
cable management system. Placing fasteners on the loop helps to maintain its shape.
The procedure to connect other types of AOCs, other than direct aach AOCs, is the same as the
procedure described in this topic.
235
To Next Page
Loading...
