Juniper EX4400 - Page 253

Table 84: Alarm Condions on EX4400 Switches (Connued)
Chassis
Component
Alarm Condion Alarm Severity Remedy
The temperature inside the
chassis reaches the red
alarm limit.
Major (red)
• Check the fan.
• Open a support case using the Case
Manager link at hps://www.juniper.net/
support/ or call 1-888-314-5822 (toll-
free within the United States and
Canada) or 1-408-745-9500 (from
outside the United States).
The temperature sensor
has failed.
Major (red) Open a support case using the Case
Manager link at hps://www.juniper.net/
support/ or call 1-888-314-5822 (toll-free
within the United States and Canada) or
1-408-745-9500 (from outside the United
States).
Management
Ethernet
interface
Management Ethernet link
is down.
Major (red)
• Check whether a cable is connected to
the management Ethernet interface, or
whether the cable is defecve. Replace
the cable if required.
• If you are unable to resolve the problem,
then open a support case using the Case
Manager link at hps://www.juniper.net/
support/ or call 1-888-314-5822 (toll-
free within the United States and
Canada) or 1-408-745-9500 (from
outside the United States).
Roung Engine /var paron usage is high. Minor (yellow) Clean up the system le storage space on
the switch. For more informaon, see
Freeing Up System Storage Space .
/var paron is full. Major (red) Clean up the system le storage space on
the switch. For more informaon, see
Freeing Up System Storage Space .
245